Stainless Steel 304 Flanges are some of the most commonly used grades of flange. These are used to connect two or more pipes or other piping components together. The ASTM A182 F304 Pipe Flanges are made up of the 304 austenitic stainless steel which is a chromium nickel alloy. The material is stronger and has some extent of corrosion resistance in general purpose applications.
Stainless Steel 304 Flanges
The tensile and yield strengths of the material makes it applicable for commercial, industrial and domestic applications. There are different types such as the A182 Gr F304 Slip on Flanges which are used to connect two pipes together by allowing the pipes to slip onto the flange. The ASME SA182 F304 Blind Flanges are used to seal the end of a pipe unlike the other flanges. The caps are important in piping to make sure a line is closed without leakages when necessary.
The flange sometimes need to be welded with an extra security. The UNS S30400 Weld Neck Flanges are made with a welded neck to them so that the joining and welding of the flange to the pies becomes easier and secure. The SS 304 RTJ Flange use rings that are attached to both sides of the connection so that the connection could be made stronger with bolting or welding.
ASME SA182 F304 Blind Flanges Size Standard and Specification
Specifications
ASTM A182/ ASME SA182
Grade
F304
Size Ranges
From 1/2 inch (i.e. 15 NB) upto 48 inch (i.e. 1200NB)
Standards
ASME | BS | DIN | ANSI | GOST | EN Flange
JIS Standards
5 K, 10K, 16K, 20 K, 30K, 40K, 63 K
Pressure Classes
Cl 150, Class 300, Cl. 400, 600, Class 900, Cl 1500 and 2500
EN Standard
6Bar, 10 Bar, 16Bar, 25 Bar, 40Bar
A182 Gr F304 Slip on Flanges Build and Purpose
This is slipped over the pipe and then fillet welded which is produce from bar or plates and basically for corrosion resistance purpose. Easy to use in fabricated applications.
Equivalent material of ASTM A182 F304 Pipe Flanges
STANDARD
UNS
WERKSTOFF NR.
JIS
BS
AFNOR
GOST
EN
SS 304
S30400
1.4301
SUS 304
304S31
Z7CN18‐09
08Х18Н10
X5CrNi18-10
Express delivery on Stainless Steel 304 Flanges various types
SS 304 Reducing Flange
A182 F304 Square Flange
SA182 Gr F304 Blind Flange
Mechanical Strength of A182 Gr F304 Slip on Flanges
Density
Tensile Strength
Melting Point
Elongation
Yield Strength (0.2%Offset)
8.0 g/cm3
Psi – 75000 , MPa – 515
1400 °C (2550 °F)
35 %
Psi – 30000 , MPa – 205
UNS S30400 Weld Neck Flanges Chemical Resistance Guide
Table of Content