Blind, Lap Joint, Orifice, Slip On, Socket Weld, Spectacle Blind, Threaded & Weld Neck.
Sizes: ¼” - 80”.
Wall Thickness available:
Schedule 5s - Schedule XXS (heavier on request).
Dimensions/Pressure Ratings.
150lb - 2500lb
ANSI, MSS-SP-44, BS3293, API 605.
BS10
Table D, E, F & H.
BS4504
PN6, 10, 16, 25 & 64.
DIN
Standard.
JIS
Standard.
» Flange Facings available:
Flat Face, Raised Face, Ring Type Joint and Tongue & Groove.
Also non-standard requirements, according to customer drawings
» Material Grades :
Stainless Steel
A182 F304/L/H, F310/H, F316/L/H, F316Ti, F321/H, F347/H, 904L.
Alloy Steel
A182 F1, F5, F9, F11, F12, F22, F91.
Carbon Steel
A105.
Low Temperature Steel
A350 LF2, LF3, LF6.
High Yield
A694 F42, F52, F60, F65, F70.
Nickel Alloys
200, 400, K500, 600, 625, 800, 825.
High Yield
ALLOY 20, ALLOY C, ALLOY C276, ALLOY B2.
Duplex & Super Duplex
A182 F51, F44, UNS S32750 & S32760.
All Plates are manufactured and inspected/tested to the relevant standards including ASTM, ASME, API.
» Other Materials Available:
Upon request including: Copper, Titanium, Cupro-Nickel 90/10 & 70/30.
» Dimension:
All Plates are manufactured and inspected/tested to the relevant standards including ASTM, ASME, API.
MANUFACTURER AND EXPORTER OF STAINLESS STEEL & HIGH NICKEL ALLOYS PIPE & PIPE I FITTINGS I FLANGES I FASTENERS STUDS I BOLT I NUTS I WASHER I TUBES I FLAT I ROUND / SQUARE / HEX BAR I WIRE CIRCLE I HOT FORGED PRODUCTS AND ALSO SHEET I PLATES I COILS & NICKEL ALLOY I MONEL NICKLE I INCONEL I INCOLY I TITANIUM I HASTELLOY & COPPER ALLOY & DUPLEX STEEL ETC.
APF that has been into exports of steel products for years, is now all set to become a global player and a truly multi-national with this trading venture.
APF that has been into exports of steel products for years, is now all set to become a global player and a truly multi-national with this trading venture.